by kyle@easilymovedequipment.com | Nov 17, 2020
The Client Tapco Inc. The Challenge Tapco wanted to show their customers how strong and rugged their grain buckets were by hanging the boss’ 8500-lb H1 Hummer from a standard bucket. After contacting several portable crane manufacturers in the U.S., they found Easily...
by kyle@easilymovedequipment.com | Nov 17, 2020
The Client Helicopter Company Project Requirements Moving drill rigs at a mine site on James Bay. The Challenge The Company had a problem: flying time was $3,600 per hour for their helicopters. The Solution The solution to this problem was to use Caterpillar tractors....
by kyle@easilymovedequipment.com | Nov 17, 2020
The Client Major Aeronautical Manufacturing Facility Project Requirements To lift and move two 16,000 lb. electrical cabinets to a raised section on the third floor. The Challenge The cabinets came in twelve pieces, each on the first floor of the building. They had to...
by kyle@easilymovedequipment.com | Nov 17, 2020
The Client Water & Wastewater Treatment Plant in Greensville Alabama Project Requirements To lift three 3,500 lb. pumps in a 26 ft. deep by 25 ft. wide pit. The Challenge Previously, a large crane had to be called in to lift the pumps. This expensive solution for...
by kyle@easilymovedequipment.com | Nov 17, 2020
The Client A rental company Project Requirements The client needed to move huge air conditioning units on the roof of a large building. The Challenge Getting the appropriate lifting equipment to handle a rooftop job, without blowing the budget. The Solution By using...
Recent Comments