Light Capacity
1100R / 2200R
Portable aluminum gantries for lighter lifting applications. Small-crew setup with standard tools, easy transport between jobsites.
Aluminum Gantry Cranes
1,100 to 22,000 lb.
Built for North America.
Capacity
1,100 – 22,000 lb
Models
6 capacities
Setup
Small-crew assembly
Tested
125% load test
Six aluminum gantry crane capacities from one supplier — lightweight enough to deploy fast, strong enough for industrial lifting, and engineered for North American jobsites. eme gantries roll while fully loaded, assemble from the ground up with a small crew and standard tools, and use interchangeable beams and trolleys within defined product ranges.
eme 1100R + 22000R · 1,100 to 22,000 lb
Engineered, Welded, and Tested for North American Jobsites
Engineered to
- ASME B30.17 Cranes and Monorails
- CSA B167 Overhead Travelling Cranes
- Aluminum Design Manual (ADM) US aluminum structural design
- CSA S157 Strength Design in Aluminum
Welded under
CSA W47.2
Canadian Welding Bureau aluminum welding certification
Workplace compliance
OSHA 1910.179
Supports employer compliance with applicable OSHA 1910.179 workplace requirements when installed, inspected, and used according to the operating manual.
Choose Your Capacity
Start with the load you need to lift, then choose the lift height and beam length for the jobsite.
Built for Real Jobsite Mobility
Lightweight Aluminum.
Easier handling at every capacity from 1,100 to 22,000 lb.
Designed for Ground-Up Assembly.
Most eme gantries can be assembled by a small crew using standard tools. For taller or higher-capacity configurations, crews can use a forklift or standard facility equipment to speed setup and reduce handling effort.
Rolls While Fully Loaded.
Reposition with the load on — no need to unload and re-rig.
Modular Interchangeable Components.
Top beams and trolleys interchange within defined product ranges.
North American Standards.
ASME B30.17, OSHA, CSA B167, and CSA S157. Welding performed under CSA W47.2 certification by qualified aluminum welders.
10-Year Warranty.
125% Load Tested.
OSHA requires a crane to be proof-load tested to 125% of rated capacity before service — an employer obligation eme completes for you: every unit ships with a Certificate of Test, backed by a 10-year warranty across the line.
Modular Gantry System
One System. Multiple Capacities. Fewer Parts to Manage.
eme gantries are built like a modern industrial kit: shared component families, standardized setup logic, and defined compatibility across the line. Crews train faster, fleets stock fewer parts, and buyers can add capacity without learning a completely different equipment system.
Mid Capacity · 2 – 3 Tonne
4400R / 6600R
The workhorse tonnage tier of the eme line — built for maintenance crews, contractors, utilities, and rental fleets that need serious 2- and 3-tonne capacity with fast deployment.
High Capacity · 5 – 10 Tonne
11000R / 22000R
Heavy-duty aluminum gantries for 5-tonne and 10-tonne lifting. Forklift-assisted assembly while preserving the loaded mobility expected from eme gantries.
Shared setup logic
Train crews once across the line.
Standardized component families
Reduce spare-parts complexity.
Fleet-friendly architecture
Add capacities without starting from scratch.
Rated configurations
Every crane is matched by model, beam, trolley, and capacity.
Final compatibility depends on the exact model, beam, trolley, and rated capacity. Confirm configuration details on the individual series page or official quote.
Standards & Engineering
Engineered, Welded, and Load-Tested.
Every eme gantry is engineered to ASME B30.17, with welded aluminum structures produced under CSA W47.2 certification by qualified aluminum welders.
Every gantry is proof-load tested to 125% of rated capacity before shipment and ships with a Certificate of Test, so the pre-service proof test is already done and documented on arrival. Each eme gantry design is also proof-load qualified on the engineer-stamped drawing before it enters production — see each model page for its design-qualification detail. The aluminum used is 6061-T6 for proven structural performance. Browse the full reference set for the technical details behind each spec.
See Standards Reference→Not sure which capacity you need?
Tell us your load, lift height, span, and jobsite. We’ll recommend the right eme gantry series, beam, trolley, and accessories.